Horse hair, water, mic, and wok lid. Now we're cookin'!

My last post featured teensy finger cymbals being dipped in water while resonating, recorded with a submerged hydrophone. This time we go a bit bigger.

Bowed cymbals are one of the classic clichéd horror movie sounds…clichéd because they’re awesome! (coincidentally, just yesterday, Chuck Russom posted some great examples on his blog.) I recorded some a while back, borrowing some cymbals from a friend at work who keeps his drum kit at work. During that session I also realized that the wok lid from my kitchen made similar sounds, but with a different timbre: More groany, throaty, less musical, but with a quality I liked.

So, I played the wok lid with a violin bow as I moved it into and out of a tub of water, again with the trusty Aquarian H2a-XLR hydrophone tracking to a Sound Devices 702.  The H2a can be overly bright on some material, but for this stuff it was pretty good! (Next time I should record the above-water sound to a second channel with a small condenser mic for more mixing flexibility.)

The recording below is 100% unedited except for some slight compression and normalization.

[Aquarian H2a-XLR hydrophone into Sound Devices 702 recorder]

Dipping struck finger cymbals into water creates some great filtering effects.

[Credit where credit's due: This is a technique I've always wanted to try, and I first heard of it in a great video by Roger Gregg, at around 02:45. The entire series is worth watching.]

So a fellow gets a hydrophone. He’s excited, and starts recording all sorts of crap. But then he has a free hour to himself and realizes that he’s got a box full of sound-making toys and objects that could sound pretty interesting underwater.

Let’s say I’m that fellow.

Before work one day, I sifted through said toybox and decided to give this a whirl. In search for a large container to fill with water, I decided to record in the executive washroom of Noise Jockey World Headquarters, and the photos in this post will give you a glimpse of the sumptuous luxury in which we conduct our noisy business.

Since our high-tech executive spa didn’t have a stopper handy, I grabbed a plastic tub and filled it with lukewarm water. I put the hydrophone halfway between the surface of the water and the bottom of the tub, suspended from a boom arm so the cable would be isolated from noise and the mic element wouldn’t sit on the bottom.

The Aquarian H2a-XLR hydrophone is pretty heavy and holds quite still. One gotcha is that a high-frequency hiss can occur from air bubbles forming on the microphone casing. This can be a challenge if the water coming out of your spigot is highly aerated. I’m still working on solving that one.

I donned a pair of finger cymbals (truly something every sound recordist should own!) and dipped one or both of them in the water after striking them together. They went into the water at a 60°-90° angle, so that they’d not create entry splashes or secondary water drips. This created a really neat tone that combined a pitch bend with a very resonant filter cutoff.

I’ve attached an edit of the raw recordings to this post. Pitch-bent down or up, obviously, there’s a lot of sonic possibilities for sound design. As with all such experiments I do, I tracked at 192kHz to ensure enough latitude for further sonic malfeasance.

[Aquarian H2a-XLR hydrophone into Sound Devices 702 recorder]